Category: News

2a11 Aluminum Plate Properties 2a11 aluminum plate belongs to Al-Cu-Mg aluminum alloy. The composition of 2a11 material is reasonable and the comprehensive performance is good. This alloy is produced in many countries and is the largest used in hard aluminum. 2a11 aluminum plate properties include high strength and heat resistance and can be used as […]

6060 Aluminum Properties   6060 aluminium belongs to 6000 series (Al-Mg-Si) alloy, 6000 series alloy is the most important extrusion alloy. At present, more than 70% of aluminum extrusion materials in the world are produced with 6-series alloy, 6060 aluminum extrusion sheet is one of them. 6060 aluminum properties include high impact resistance, moderate strength, […]

Common Aluminium Sheet Metal Aluminium sheet metal has a series of superior properties compared to other non-ferrous metal sheets, steel sheets, plastic sheets, and wood boards. For example, Aluminium sheet metal has the advantage of low density of only 2.7g/cm3, which is about 1/3 of copper or steel, so it is the most ideal material […]

Overview of Aluminum Slit Coil Aluminum slit coil is also referred to as thin sheets of aluminum. It is an aluminum strip. The alloy grades of commonly used aluminum slit coil are 1050, 1060, 1070, 1100, 3003, 3004, 5005, 5052, 8011, etc., and the state has O and H etc. The specific applications of the […]

Overview of 5083 h111 5083 h111 means that after the final annealing of the 5083 aluminum plate, an proper work hardening is performed, that is, the h111 state, the degree of hardening required is obtained, but the degree of work hardening is not comparable to the h11 state (h11: no Additional heat treatment, the hardness […]