5086 Aluminum Alloy Sheet for Pressure Vessels
Sample: A4 Sized
Payment Terms: L/C,D/P,T/T
Delivery time: Within 15-30 Days
Email Us:sale06@mingtai-al.com
Pressure vessels and storage tanks demand materials that hold steady under internal pressure, cyclic loading, moisture and chemical exposure. For welded, unfired pressure vessels, marine tanks and cryogenic containers, 5086 aluminum alloy sheet is a trusted Al-Mg solution. Mingtai Aluminum supplies certified 5086 aluminum sheet and plate optimized for pressure vessel fabrication, with stable mechanical performance, superior seawater corrosion resistance and reliable weldability.
Core Advantages of Mingtai 5086 Aluminum Sheet for Pressure Vessels
High resistance to stress corrosion cracking
As a 5-series aluminum-magnesium alloy, 5086 aluminum alloy sheet delivers excellent resistance to exfoliation and stress corrosion cracking. H116 and H321 stabilized tempers are specially designed for long-term service in coastal, salt spray and marine environments, lowering the risk of failure under sustained pressure load
Excellent weldability with high joint integrity
It can be welded by TIG / MIG welding with 5183 or 5356 filler wire. The weld zone maintains good toughness and strength retention, which is essential for large welded vessel shells, heads and tank bodies
Outstanding low-temperature toughness
Unlike carbon steel, 5086 aluminum does not become brittle at low temperatures. It performs reliably for cryogenic storage vessels and cold medium tanks.
High strength-to-weight ratio
Much lighter than steel, it helps reduce the dead weight of pressure equipment, cut transportation cost and lower structural support load.
Controlled flatness & stable consistency
Mingtai adopts tension leveling and strict thickness tolerance control. Each batch comes with MTC material test certificates for pressure vessel code review.

Technical Specification – Mingtai 5086 Aluminum Alloy Sheet
| Item | Details |
|---|---|
| Alloy | 5086 |
| Common Tempers | H116, H321, H112, H111 |
| Thickness | 4 mm – 100 mm |
| Width | 600 mm – 2600 mm |
| Length | Custom cut-to-size |
| Surface | Mill finish, clean surface, no rolling defects |
| Applicable Standards | ASTM B209, EN 485, GB/T 3880 |
| Supply Form | Aluminum sheet / plate, cut blanks |
Typical Applications
– Welded unfired pressure vessels
– Marine pressure tanks, offshore platform storage containers
– Chemical and brine storage tanks
– Cryogenic liquid tanks and cooling equipment
– Tanker pressure compartments and shipboard service tanks
Why Choose Mingtai Aluminum for 5086 Pressure Vessel Aluminum Sheet
Mingtai Aluminum is a professional rolled aluminum manufacturer with mature production lines for marine and pressure vessel grade aluminum plates. We strictly control grain structure, internal stress and corrosion performance. We support third-party inspection, custom cutting, edge deburring and export seaworthy packaging. Our 5086 aluminum sheets are widely supplied to pressure vessel fabricators, marine engineering companies and energy equipment manufacturers worldwide.
FAQ
Q1: What temper is recommended for pressure vessels?
A: H116 and H321 are the preferred stabilized tempers for marine and pressure vessel use, offering better anti-exfoliation corrosion performance. H112 is commonly used for general industrial storage tanks.
Q2: Can 5086 replace 5083 for pressure vessels?
A: 5086 has better resistance to stress corrosion cracking under long-term static pressure and saltwater exposure, while 5083 offers slightly higher base strength. Selection depends on design code and working medium.
Q3: Do you provide material test certificates?
A: Yes, Mingtai provides official MTC for each shipment to meet pressure vessel audit requirements.






