The difference between 6060 aluminum plate and 6063 aluminum plate

Loading Port: Tianjin/Qingdao, China
Sample: A4 Sized
Payment Terms: L/C,D/P,T/T
Delivery time: Within 15-30 Days
Email Us:zhangmenghao@mingtai-al.com
Contact Us

The difference between 6060 aluminum plate and 6063 aluminum plate:

The chemical composition and processing properties of 6060 aluminum plate and 6063 aluminum plate are similar, but not identical. The difference between the two is strength. 6060 is the national standard aluminum alloy for doors and windows, and 6063 is the aerospace aluminum alloy approved by the state.

6060 aluminum plate

Material Composition of 6060 aluminum plate:

Si: 0.3-0.6; Fe: 0.1-0.3; Cu: 0.1; Mn: 0.1; Mg: 0.35-0.6; Cr: – Zn: 0.1; Other: – Ti: 0.15; Others total: 0.15; Al: the amount.

Performance Characteristics of 6060 aluminum plate:

Tensile strength σb (MPa): ≥ 470
Conditional yield strength σ0.2 (MPa): ≥420
Elongation δ5 (%): ≥ 6
Features: 1. High strength heat treatable alloy. 2. Good mechanical properties. 3. Good usability. 4. Easy to process and good wear resistance. 5. Anti-corrosion performance, good oxidation resistance

6060 aluminum plate

Use of 6060 aluminum plate use:

Main uses: Aerospace fixtures, trucks, tower buildings, boats, pipelines and other areas of construction that require strength, weldability and corrosion resistance.

Chemical Composition of 6063 aluminum plate:

Aluminum Al: balance; silicon Si: 0.20-0.6; copper Cu: ≤ 0.10; magnesium Mg: 0.45-0.9; zinc Zn: ≤ 0.10; manganese Mn: ≤ 0.10; titanium Ti: ≤ 0.10; chromium Cr: ≤ 0.10; Iron Fe: 0.000 ~ 0.350; Note: single: ≤ 0.05; total: ≤ 0.15;

Introduction to features of 6063 Aluminum Plate Product:

6063 aluminum plate belongs to Al-Mg-Si alloy and has a wide range of applications. Especially in the construction industry, it is the most promising alloy. Good corrosion resistance, excellent weldability, good cold workability and medium strength. Mingtai Aluminum 6063 aluminum plate manufacturers are of high quality and low price.

6063 aluminum plate

Application of 6063 aluminum plate:

The main alloying elements of 6063 aluminum plate are magnesium and silicon. It has excellent processing properties, excellent weldability, extrusion and plating properties, good corrosion resistance, toughness, easy polishing and coloring, and excellent anodizing effect.It is a typical extruded alloy. 6063 aluminum plate is widely used in building profiles, irrigation pipes, vehicles, gantry, furniture, lifts, etc. due to its good plasticity, moderate heat treatment strength, good welding performance and gorgeous color on the surface after anodizing. Pipes, rods and profiles for fences and the like.

6063 aluminum plate

6063 Aluminum Plate is a Low Alloyed Al-Mg-Si High Plasticity Alloy, Which Has Many properties :

1. Heat treatment strengthening, high impact toughness.
2. It has excellent thermoplasticity and can be extruded at high speed into a complex structure.Such as thin wall. Hollow various profiles or forged forgings with complex structure, It also has wide quenching temperature range, low quenching sensitivity, after extrusion and forging demoulding, As long as the temperature is higher than the quenching temperature. It can be quenched by spraying water or water. Thin-walled parts (6<3mm) can also be subjected to wind quenching. 3. Excellent welding performance and corrosion resistance, no tendency of stress corrosion cracking. Among heat-treated reinforced aluminum alloys, Al-Mg-Si alloy is the only alloy that has no stress corrosion cracking phenomenon. 4. The surface after processing is very smooth and easy to anodize and color. The disadvantage is that if it is aged at room temperature for a period of time after quenching, it will have an adverse effect on the strength (parking effect).

*Name
Phone
*Message

   


©2019-2020 Mingtai Aluminium all rights reserved.| Email:zhangmenghao@mingtai-al.com
 

HOME
PRODUCTS
NEWS
CONTACT US