Contact Mingtai

5086 h116 Aluminum Plate ASTM B209 Plate

Loading Port: Tianjin/Qingdao, China
Sample: A4 Sized
Payment Terms: L/C,D/P,T/T
Delivery time: Within 15-30 Days
Contact Us

5086 h116 Aluminum Plate ASTM B209 Plate

5086 h116 aluminum plate is typical 5 series alloy with high strength. For its high strength, is due to strain hardening or cold working of H116 temper. Meanwhile, the H116 tempered 5086 aluminum has obtained excellent resistance to peeling corrosion. And its mechanical properties vary significantly with hardening. In practice, 5086 h116 aluminum plate also shows better workability, formability, weldability,etc. So It’s widely applied for weld construction, tank truck, auto parts, tread plate, especially for marine application.
5086 h116 aluminum plate

Features of 5086 h116 Aluminum Plate

Cold Working
5086 h116 aluminum plate is belongs non-heat treated alloy. For Its strength and mechanical properties, are improved by cold working. And Al 5086 h116 can readily cold worked by conventional methods.
Corrosion Resistance
H116 tempered 5086 aluminum sheet is typical marine grade aluminum alloy. This is due to its excellent resistance to erosion in extremely humid environments, such as sea water and the atmosphere, etc.

5086 h116 aluminum plate

Weldability of 5086 h116 aluminum plate is very good by conventional means. It’s easily welded and does have good strength.
Other Features
Soft texture, the density of 5086 aluminum material is only 2.66g/cm3. But 5086 aluminum plates have even higher strength than 5052 or 5083 alloy.

Physical Properties of 5086 h116 Aluminum Plate

Density 0.096 lb/cu. In
Specific Gravity 2.66
Melting Point 1070 Deg F
Poissons Ratio 0.33
Modulus of Elasticity Tension 10.3
Modulus of Elasticity Torsion 3.8

Mechanical Properties of 5086 h116 Aluminum Plate

Alloy Temper Tensile Strength Yield Strength Elongation
5086 H116 40 28 10

5086 h116 aluminum plate

Application of 5086 h116 Aluminum Plate

Tread plate
Tank cars
Welded and superstructures
Patrol and work boat hulls
Armor plate
Commonly used in the manufacture of unfired, Welded and superstructures, welded pressure vessels, marine, auto aircraft cryogenics, drilling rigs, TV towers, transportation equipment, and in missile components.

Technical Parameters of 5086 h116 Aluminum Plate

Elements Mg Mn Fe Si Cr Zn Cu Ti Others Al
Content 3.5~4.5 0.20~0.7 0.5 0.4 0.05~0.25 ≤0.25 0.1 ≤0.15 0.05 Remain
Typical Alloy 5786 Aluminum
Material Temper H116
Alloy Types Sheet, Plate, Tread plate, Coil, Tread coil
Surface Pattern Plain, Diamond, Big 5 bar, Small 5 Bar, 3 Bar, 2 Bar, Single Bar
Thickness (mm) 0.1-500
Width (mm) 20-2650
Length (mm) Customize
Typical Product Shipyard, Tread plate, Tank cars, Welded and superstructures, Patrol and work boat hulls, Armor plate, etc


©2019-2021 Mingtai Aluminum sheet supplier all rights reserved.|