Category: News

Aluminum Sheets 5754 h114 Properties The h114 in aluminium 5754 h114 actually refers to the O of 5754-O aluminum, that is, the 5754 aluminum sheet is fully annealed to obtain the lowest strength annealed state. However, because the 5754-O aluminum was embossed, the 5754-O aluminum became an aluminum tread plate, and the state at this […]

5083 h116 Aluminum When we see h116 in 5083 h116 aluminum, we know that it is a high magnesium aluminum alloy with a magnesium content of ≥4.0% in the 5000 series. For h116, it means that under this temper, 5083 aluminum plate has the prescribed mechanical properties and anti-stripping corrosion properties. Unlike 5083 h112 properties, […]

Difference between 6063 vs 6061 Aluminium for Construction 6063 aluminum plate is a raw material for aluminum alloy doors and windows in the construction hardware industry, which has become an indisputable fact, and mainly because of the low cost of 6063 aluminum plate, which is conducive to the compression of the insulation strip of broken […]

5083 h321 Aluminum for Marine 5083 h321 aluminum refers to the processing mode in which 5083 aluminum plate is processed and hardened by low-temperature heat treatment or directly heated in the processing process, so as to obtain stable mechanical properties. In this state, the hardening degree is about 2 degrees of hardness. The tensile strength […]

Overview of 5754 h22 Aluminum 5754 h22 aluminum means that after the work hardening of 5754 aluminum sheet exceeds the requirements of the finished product, it is necessary to undergo incomplete annealing, so that the strength of 5754 aluminum sheet is reduced to the specified index, and the hardness level of 2 is not hard. […]