Aluminum Foil for Electrolytic Capacitor
Sample： A4 Sized
Payment Terms： L/C,D/P,T/T
Delivery time： Within 15-30 Days
Aluminum Foil for Electrolytic Capacitor
Aluminum foil for electrolytic capacitor is mainly used as a foil for capacitor electrodes. Electrolytic capacitors are formed by winding a layer of anode, a layer of negative electrode, and a layer of paper impregnated with a saturated electrolyte paste. The anode aluminum foil for electrolytic capacitor of the anode adopts aluminum foil which is etched and then anodized, which can also be referred to as a formed foil. For the negative aluminum foil for electrolytic capacitor, an aluminum foil that is only subjected to the etching process and not anodized is used. At this time, the negative foil formed is the lead foil of the cathode. Therefore, it is customary in the capacitor industry to call the negative foil is cathode foil, or corrosion foil. In fact, the negative electrode foil and electrolyte paste with a dense and non-porous Al2O3 aluminumoxide foil on the surface constitute another capacitor, but because the oxide film is thin, its capacitance CC is much larger than that of the anode foil and the electrolyte paste CA, so an increase in surface area means an increase in electrostatic capacity and better performance of the electrolytic capacitor. Therefore, the aluminum foil for electrolytic capacitor plays a very important role as a negative(cathode) electrode material.
Alloy Cathode Aluminum Foil for Electrolytic Capacitor
3003 Aluminum Foil for Electrolytic Capacitor
3003 electronic aluminum foil is a capacitor electrode foil commonly used in Al-Mn series alloys. Since 3003 aluminum foil for electrolytic capacitor has Mn alloy element, it has extremely excellent corrosion and rust resistance. In addition, 3003-H18 aluminum foil, 3003-O aluminum foil, 3003-H24 aluminum foil, these aluminum foil for electrolytic capacitor with different temper can meet the performance requirements of various electrolytic capacitors. It is worth mentioning that the 3003 aluminum foil for electrolytic capacitor produced by Mingtai has a good shape, the surface is clean and free of defects such as oil stains, bubbles, scratches, etc., and the end face is neat and accurately controlled within the error range. In addition, the edges of 3003 aluminum foil are free of burrs and cracks, and are widely accepted by the international market.
1070、1100 Aluminum Foil for Electrolytic Capacitor
1070, 1100 aluminum foil for electrolytic capacitor belong to the 1 series as industrial pure aluminum, the aluminum content (mass fraction) is 99.00%, so they have high electrical conductivity that can up to 65.0%IACS, and good thermal conductivity and corrosion resistance, well meet the performance requirements of aluminum foil for electrolytic capacitor Here, Mingtai 1070、1100 aluminum foil for electrolytic capacitor have stable performance and guaranteed quality. They are applied to electronic foils with a market share of over 80%.
Specification of Aluminum Foil for Electrolytic Capacitor
|Alloy Series||Typical Alloy||Meterial
Henan Mingtai Aluminum Industry Co., Ltd is a high-end aluminum foil manufacturer with more than 20 years of experience in the production and processing of aluminum foil/sheet/strip/coil, So far, Mingtai 1070, 1100, 3003 aluminum foil for electrolytic capacitor and other products have been sold in more than 100 countries and regions on 7 continents, including developed countries such as Europe and the United States, South Korea and Japan. Here, Mingtai currently has 1500 mm elevated cold rolling mill 1 set, 1650 mm high performance foil rolling mill 6 sets, 1600 mm heavy coiler 1 set, 1300 mm-1850 mm high precision slitting machine 8 sets, etc., to meet the world Huge demand of aluminum foil for electrolytic capacitor. If you have any needs, don’t hesitate to click on the manual customer service on the right, chat online, and get it for free! Mingtai sincerely looks forward to your inquiry! Come on!