Category: News

Difference between 6063 vs 6061 Aluminium for Construction 6063 aluminum plate is a raw material for aluminum alloy doors and windows in the construction hardware industry, which has become an indisputable fact, and mainly because of the low cost of 6063 aluminum plate, which is conducive to the compression of the insulation strip of broken […]

5083 h321 Aluminum for Marine 5083 h321 aluminum refers to the processing mode in which 5083 aluminum plate is processed and hardened by low-temperature heat treatment or directly heated in the processing process, so as to obtain stable mechanical properties. In this state, the hardening degree is about 2 degrees of hardness. The tensile strength […]

Overview of 5754 h22 Aluminum 5754 h22 aluminum means that after the work hardening of 5754 aluminum sheet exceeds the requirements of the finished product, it is necessary to undergo incomplete annealing, so that the strength of 5754 aluminum sheet is reduced to the specified index, and the hardness level of 2 is not hard. […]

Introduction to 6063 Extruded Aluminum 6063 aluminum plate belongs to forged aluminum alloy, and belongs to deformed aluminum alloy in the alloy group. The first digit 6 in the grade indicates that the alloy uses magnesium and silicon as the main alloying elements, and Mg.Si phase as the strengthening aluminum. Alloy, in addition, 6000 series […]

Introduction to 5052 vs 5754 Aluminum Sheet There are the respective characteristics of 5052 vs 5754 aluminum sheet. For example, the molding processability of 5052 aluminum sheet is outstanding, but 5754 has the highest strength among non-heat-treated alloy aluminum sheets. Not only that, the surface processing quality of 5754 aluminum sheet is very outstanding. 5754 […]