Aluminum coil manufacturer
Sample： A4 Sized
Payment Terms： L/C,D/P,T/T
Delivery time： Within 15-30 Days
Email Us:sale06@mingtai-al.com
Introduction to Aluminum coils:
Aluminum coils are metal products for the flying shears after the casting mill has been subjected to calendering and drawing.
Use of Aluminum coils:
Aluminum coils are widely used in electronics, packaging, construction, machinery, etc. There are many aluminum coil production enterprises in China, and the production process has caught up with developed countries.
Depending on the metal elements contained in the aluminum coil, the aluminum coils can be roughly divided into 9 categories, that is, they can be divided into 9 series.
Packaging of Aluminum coils:
Conventional packaging of aluminum coils: For aluminum coils with a thickness greater than 0.05 mm and in a hard state, it is generally available in a T-frame package, and the packaging should meet the requirements for storage and transportation. The riddle frame is made of wood, and the upper and lower sides are made up of two wooden sides. The height of the rafter should meet the requirements of the work of the forklift. The upper part of the upper wooden side is formed into an arc shape corresponding to the radial direction of the roll, and the upper and lower pieces are fixed by screws. The length of the screw should be lower than the arc surface of the upper wood to avoid stabbing the aluminum coil. The product is inspected and stamped. First, the outer surface of the aluminum foil should be wrapped with a strong neutral or weakly acidic material. The bill of lading is glued to the lap joint.
A soft pad is placed on the end face pad to protect the end face of the aluminum case roll. Next, add the desiccant, wrap the entire roll with a whole plastic sheet, the outer plastic cloth mouth of the lap joint is down and taped, and the excess part of the plastic cloth is plugged into the mandrel. After that, the weather-resistant cardboard is wrapped in the circumferential direction to wrap the entire aluminum coil and the closed end faces, and the end faces and the circumferential joints and all the gaps are taped. The wrapped aluminum foil roll is placed on the traverse frame and fixed in a circumferential direction with a steel strip, and the steel strip should be bundled firmly. Place a box on each end of the wrapped aluminum foil roll. This way you can see the parameters of the aluminum coil more directly!
